A screen for a window, especially one on a roller or made of slats.
The molding around the perimeter of a door or window that seals the gaps between the door frame or window frame, and the wall. The brick mold helps insulate the interior and offers a warm decorative touch to the sunroom. LivingSpace brick molds are a single, sealed piece of pultruded vinyl
A standard set of regulations that govern the procedures and details of construction. Most state and provincial governments adopt building codes maintained by the International Code Council (ICC); For more information, click here.
A supporting member that projects into space and is itself supported off-end.
A common fastener used in construction, typically used to fasten metal to wood.
A horizontal roof framing member that secures opposing pairs of rafters.
A standard size rectangular block used in building construction.
A structural vertical post at the corner of the sunroom; creates the frame in the corners of the sunroom and support the roof.
Also see saddle; A ridge structure designed to divert water on a roof around the transition from one roof area to another.
The material of a lumber platform or terrace attached to a house or other building.
A precast concrete head with four holes in it, through which long steel pins are driven into the ground to secure a foundation for the sunroom. Far faster and easier to install than traditional concrete footings.
A structural element that transmits lateral loads to the vertical resisting elements of a structure.
The classic single swinging door. Can be configured to swing into, or out of the sunroom, and to open from the left or the right.
A pair of two swinging doors that open in tandem to form a large, unobstructed entry to the sunroom.
A large glass door that slides along guides in the top and bottom of the frame, without swinging in or out of the structure.
An upright projection on a roof, usually with a window.
Also known as insulating glass or double glazing, it consists of two window panes separated by a vacuum or gas filled space to reduce heat across the window.
The lower edge of a roof that extends beyond the fascia board to allow runoff to drain into the gutters.
The industry leading system for structural performance, insulating capacity, and design flexibility; Structurally, 3-Ply has an OSB exterior, a foam fill, and another layer of OSB while 4-Ply adds an extra interior vinyl skin.
LivingSpace’s premier collection; Uses state-of-the-art building materials and gives complete customization control to the customer; For more information, click here.
Also known as an electrical raceway; Forms a concealed, insulated pathway for electrical wiring.
Any manufactured product made of solid wood, wood veneer, wood pieces, or wood fibers in which the components have been bonded together with adhesives.
The process by which vinyl is forced through a die that has a specific shape, resulting in a formed product; Used to manufacture various customized pieces of vinyl.
A board that is nailed to the ends of rafter tails.
Made of sand, recycled glass, and thermoset resins. A composite material that is extremely strong, stable, and thermally non-transmitting.
Based on standardized tests that determine how quickly flames will engulf the surface of a material.
A piece of metal that protects materials against water seepage.
The triangular portion of a wall between the edges of intersecting roof pitches.
A lighting option that can swivel up to 20 degrees and is often used on exterior angled soffits to point to below landings.
The clear glass or plastic portions of a window.
A LivingSpace creation based off the Main Key; Slides into the starter and the corner piece to help form the foundation of a sunroom; Attaches same way as the Main Key; For more information, click here.
A rail fixed to posts or a wall for people to hold on to for support.
Risk categories that define a building’s ability to withstand hurricane-like winds.
A high strength rectangular tube that is inserted into the header; designed to secure the structure in hurricane-force winds; For more information, click here.
A measure of the strength of window and door products to resist projectiles that may impact them during a storm event.
A building code created by the International Code Council in 2000 that established minimum design and construction requirements for energy efficiency.
A standardized building code designed to account for regional variations; It covers detached one- and two-family dwellings and townhouses that are no more than three stories high; Provides minimum standards that are widely recognized.
A common fastener used in construction that can be screwed directly into wood without needing to make a hole; Also commonly known as lag screws.
The part of the floor next to the top or bottom of a flight of stairs.
The final step in completing the exterior of the house.
A length of lumber that connects a deck to the house.
Connects the deck to the house.
A two-lead semiconductor light source that emits light when activated; typically small, integrated optical components may be used to shape the radiation pattern; For more information, click here.
The application of two layers of silver into a window; Reflects infrared and UV radiation, improving the energy efficiency and usability of the interior.
The application of three layers of silver into a window; Reflects infrared and UV radiation, improving the energy efficiency and usability of the interior.
An engineered wood product in which the basic element is wood veneer glued together.
A LivingSpace creation that works similarly to fasteners when forming the foundation of a sunroom; For more information, click here.
Vertical vinyl beam with fiberglass reinforcement that forms the wall frame and supports the roof. At the corners of the sunroom, the frame is instead constructed from Corner Posts; For more information, click here.
Vertical pieces separating windows of various sizes and styles combined to make up a larger unit.
A short vertical or horizontal piece used to hold a pane of window or roof glass.
A protruding structure which may provide protection for lower levels.
A compact heating and cooling unit; typically mounted in the knee wall.
A concrete column that supports a concentrated load, such as a post.
The slope of the roof, measured in rise:run. For example, a roof pitch of 5:12 would be steeper than a pitch of 3:12.
An angled cut at the ends, or peak of a roof panel or rafter that allow fascia boards and gutters to be installed properly.
A translucent roof system made with high strength polycarbonate with an advanced aluminum core. Diffuses light and has greater strength than tempered glass.
Any concrete object that is cast in a factory, cured under controlled conditions, and then delivered to the job site.
Refers to the number of layers in roofing, decking and knee-wall panels; OSB, Foam Fill, OSB.
Refers to the number of layers in roofing, decking and knee-wall panels; OSB, Foam Fill, OSB, Interior Vinyl Skin.
Conceals Electrical Raceway and protects wires and cables from heat, humidity, corrosion, and water intrusion.
When buildings tilt or twist as their structural components are forced out of “plumb.”
Also see cricket; A ridge structure designed to divert water on a roof around the transition from one roof area to another.
Glass that has been toughened or laminated so that it is less likely to splinter when broken.
The part of a window that holds the glazing.
A frame with fine wire netting used in a window or doorway to keep out mosquitoes and other flying insects.
The application of an earthquake-generated agitation to a building structure or its model.
A rectangular tile of asphalt composite, wood, metal, or slate used on walls or roofs.
Stationary glass units that are installed alongside a door or window unit.
On the interior, an area around the perimeter of a room that is lower than the rest of the ceiling; On the exterior, the underside of the eaves.
A number between 0-1 that represents a window’s ability to reflect warming solar radiation; A higher number indicates that more solar heat is allowed through the glass, leading to a warmer interior.
A series of steps along with all the related elements, including structural elements such as stringers and finish elements such as handrails and balusters.
A rigid panel of expanded polystyrene (EPS) foam insulation between sheets of exterior plywood or oriented-strand board (OSB); also called a foam-core panel.
A list of products that have been evaluated and meet the requirements of the IRC and the IBC.
Glass that is chemically or thermally treated to increase its strength and resistance to scratching, cracking, and shattering; Tempered glass is usually required around doors and in glass knee walls.
A LivingSpace collection option that gives customer’s customization control while maintaining affordability; For more information, click here.
The area from the top of the window to the roof.
see Wing Fill; Top of a Cathedral sunroom.
Glass that has been tinted to reduce light projection and has a visible light transmittance of 45% or less.
In roofing, a material, such as roofing felt, applied to the roof sheathing before shingles are installed; In flooring, a thin panel product whose surface is smoother than standard subflooring.
A hole that provides drainage near the bottom of a wall.
The load, in pounds per square foot, placed on the exterior of a structure by wind.
A length of material used for decorative and framing purposes with square edges that is surfaced on four sides.
see trapezoid; Top of a Cathedral sunroom.
Also known as a nailing fin; Attaches to the house along the window frame to redirect water away from the interior of a home.